Steriflow Mark 96AA Series Manuel d'utilisateur télécharger pdf

Steriﬂow by Jordan Valve

3170 Wasson Road • Cincinnati, OH 45209

513.533.5600 • 800.543.7311 • 513.871.0105 (f)

steriﬂ[email protected] • www.steriﬂowvalve.com

Mark 96AA Series

Sanitary Air Augmented Pressure Regulators

The Mark 96 with air augmentation (AA) option offers

the same line sizes, Cv choices, seats, great low

droop characteristics, and stability of the standard

bolted bonnet Mark 96, but with an advantage. By

connecting an air pressure signal to the 1/4" FNPT

dome tting via an air regulator or I/P, the set point

can be changed remotely by "sending an air signal

instead of a technician".

The Mark 96AA gives users the ability to change pres-

sure set points to any point in excess of the springs

minimum set point (2 psi on a 3/4" – 1" Mark 96, 10

psi on a 1-1/2" – 2", and 15 psi on a 3"). Users adjust

the regulator's spring to the lowest set point, or to the

lowest set pressure that the regulator will operate at

(sterilization steam pressure for example). To achieve a

higher pressure set point (CIP or WFI ush), air pres-

sure is added to the regulator dome. To lower the set

point to it's previous value, or to the springs manual set

point, the pressure is reduced in the same manner.

The Mark 96AA is used in conjunction with a Steriow

self relieving I/P for control via PLC or DCS, or with a

JSRLF regulator with self relieving option (For example

- for remote control by valve mounted on wall, or panel

outside of a cleanroom.)

Features

• Reduce project CapEx. Remote regulator opera-

tion reduces the time required for steam pressure

balancing, commissioning and validation of SIP and

CIP routines.

• Complete range of products for any size or Cv

requirement. The available sizes and Cv's are the

same as the current MK96 product line.

• Mark 96AA upgrade kits available for MK96 regulators.

• With preset spring, users maintain control in the event

of power (air failure). Valve will return to manual preset.

• Minimal droop when compared with all other spring

loaded and air operated products, especially at

higher set points.

Sanitary Valves Mark 96AA Sanitary Pressure Regulators

• Extended permissible operating range

when compared with all spring loaded and

air load regulators.

The minimum set point is equivalent

to the minimum spring rate set point (2

psi on a 3/4" – 1",

10 psi on a 1-1/2" – 2", and 15 psi on a

3" model).

No differential pressure requirements.

Users can adjust the set point to any

point between the minimum and maxi-

mum set point, without restriction.

Documentation

The following documentation is shipped with

each order:

• Steriow Unicert

— Certicate of Material Compliance with

Traceable Material Heat Number for

body and ferrules and MTRs

— Certicate of Compliance to FDA and

USP Class VI

— Certicate of Surface Finish

• Final Test Reports and Certicate of Ori-

gin available upon request at time of order

—

"Send a signal

not a

technician"

1 2 3 4 5 6

Résumé du contenu

Page 1 - Mark 96AA Series

Steriﬂow by Jordan Valve 3170 Wasson Road • Cincinnati, OH 45209 513.533.5600 • 800.543.7311 • 513.871.0105 (f)steriﬂ[email protected] • www

Page 2 - USP Class VI

Mark 96aa SerieS Sanitary air augMented PreSSure regulatorSspeciFicationsSizes: 3/4" (DN20), 1" (DN25), 1-1/2" (DN40), 2" (DN50),

Page 3 - Features & beneFits

Mark 96aa SerieS Sanitary air augMented PreSSure regulatorS-3-Features & beneFits316 T-handle for easy handling and minimum setpoint adjustmentT

Page 4 - Dimensions

-4-Mark 96aa SerieS Sanitary air augMented PreSSure regulatorSDimensionsØDBCAOutletInletValve SizeDimensions (inches)WeightLbsA B C D E F3/4" 3.2

Page 5

-5-Mark 96aa SerieS Sanitary air augMented PreSSure regulatorSsample speciFicationStainless steel sanitary pressure regulator shall be made from ASME-

Page 6

Mark 96aa SerieS Sanitary air augMented PreSSure regulatorSorDering schematic For mark 96aa96AA/0414/ABSteriﬂow, a division of Jordan Valve3170 Wasson

Commentaires sur ces manuels

Pas de commentaire

Steriflow Mark 96AA Series Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Steriflow Mark 96AA Series. Steriflow Mark 96AA Series User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Steriflow Mark 96AA Series